newdayluck

A single component - OPC-Server S7/S5 - provides a quick and easy access to process data in your controllers S7-200, S7-300, S7-400 and WinAC, in modules of C7 and M7, as well as controllers, S5, Pilz, Saia -Burgess or VIPA.

Name of Program: Softing S7 OPC Server
Program version: V 3.10
Language: English, German
Treatment: Complete
System requirements:
Windows NT 4.0 SP6, Windows 2000 SP4, Windows XP and Windows 2003 Server
Size: 488 Mb

Address to a variable occurs at addresses determined in accordance with the semantics of STEP7 and STEP5 respectively.
To write / read from the controller output / input data, data blocks, markers, timers and counters can be used by any client applications that are compatible with standard OPC.
Chance of simultaneous access to multiple controllers (up to 256). To communicate with the S7/S5 OPC-server is not necessary to change the program the programmable logic controller (PLC).
Access to the controller is possible via Ethernet or PROFIBUS, via USB-or LPT-port with or without a modem.
When communicating over Ethernet can be used by communications processors from different manufacturers, gateways and interface NETLink PRO company Softing.
Requests for reading and writing are grouped using intelligent tools and techniques, thereby optimizing the data flow is performed most efficiently. When comparing the obtained in practice productivity seven S7 OPC-servers-known manufacturers, the server company Softing S7/S5 OPC was recognized as "best in class" (Best in Class).
Namespace OPC configured quickly by importing the symbolic names from STEP7 projects or Excel-files. Previously developed projects can be exported from the software applications, such as imaging process or process control systems, in Excel, then easily uploaded to the server S7/S5 OPC. OPC-Server supports the functions of the Web-server solutions for the problems of diagnostics and data visualization process, which allows you to display data and process information about the state of the PLC to monitor local or remote PC using any standard Web browser.
To ensure reliable and powerful remote access without DCOM, OPC-server in S7/S5 OPC-integrated tunnel company Softing. Using OPC-tunnel eliminates the problems associated with the DCOM security settings and allows you to save significant time and cost.
It takes only a few minutes to adjust the exchange of data between network nodes.

The procedure for treatment
After installing the "OPC Server" open "father" Crack "and run" sos_softing "and set under the same folder where you installed" OPC Server ".
Home Page

Download: